GKDY mine general power control switch cabinet/GKDC mine general power cabinet

电源柜照片副本
넳 넲
product introduction:
GKDK mine general power switch cabinet and GKY mine general power supply cabinet are widely used in non-gas explosion dangerous mine underground and ground applications power distribution room, to provide stable DC power supply for power supply and distribution equipment. Mine general power switch cabinet and mine general power supply cabinet have passed KA certification of national safety standard center.

GKDY mine general power supply control switch cabinet and GKDC mine general power supply cabinet can be used in metal or non-metal mine underground power distribution room to provide stable DC power supply for power supply and distribution equipment. Both the mine power control cabinet and the mine power cabinet have passed the KA certification of the national safety standard center.

Product Parameters

AC input voltage (50Hz) AC380V;AC220V
power factor ≥ 0.9
Nominal voltage of DC system DC220V;DC110V
DC output rated current 30A
Battery capacity 100A·h
Overall efficiency ≥ 90%
noise ≤ 65dB
protection level IP43
standard dimensions (W×D×H) 800×600×2000(mm)

products:
(1) Power supply function: 2 channels of mutual backup AC power supply, 10 channels of DC output power supply, 10 channels of AC output power supply, battery backup DC power supply, etc.
(2) Battery management function: Automatically manage battery charging by setting parameters in advance, including battery charging modes such as constant current, floating charge, and even charge, and configure a battery inspection module to detect the voltage status of the single battery in real time.
(3) Insulation detection function: it can detect the insulation performance of each section of bus and all branch circuits, and the number of detection circuits can be modularized; It has the function of AC string-in detection.
(4) Protection alarm function: AC power supply fault alarm, battery pack fault alarm, bus fault alarm, charging module or communication module fault alarm, etc.
(5) Monitoring of power parameters: The power cabinet is equipped with power meters for monitoring the closing bus voltage, control bus voltage, battery pack current and control bus current.
(6) Communication function: The power cabinet can be connected to the SCADA system in the traction substation through the RS485 communication interface to upload various working status information and monitoring data.

Product Details

ꄴThe previous one： KZL series mine-used general type electric locomotive rectifier cabinet
ꄲThe latter one： WDQXB series intelligent box-type DC traction substation

Products

Pre-assembled DC traction solution for surface mining transportation

ꁸ